GE 840136300 Mixer User Manual


 
5
Power Surge (on selected models)
Press and hold down the button for
additional power
at any speed.
NOTE: Do not use
Power Surge
for more than
two minutes at
a time or motor
may overheat.
Eject
Surge
0
Power
Surge
1. Make sure mixer is unplugged and
speed control is set to 0 (OFF).
Insert beaters.
2. Plug mixer into electrical outlet.
Place beaters into bowl.
3. Move the speed control to desired
speed, starting
at 1 and
increasing to
a higher speed
as necessary.
4. When finished mixing, move the
speed control to 0 (OFF) and
unplug mixer.
5. To eject beaters, with speed control
set at 0 (OFF)
push straight
down on the
speed control.
Speed
Control
Eject
0
2
4
6
5
3
1
OFF
To Mix
Features
Hand Mixer Stabilizer
CAUTION: Never use the stabilizer when
the mixer is on.
Do not use the
stabilizer on
small (1
1
2 quart)
mixing bowls or
plastic mixing
bowls. This fea-
ture can be used
on most large
mixing bowls. Use the stabilizer while
adding ingredients or checking a recipe.
To use, TURN MIXER OFF, then set
the mixer on the edge of the bowl.
840136300 ENv00 4/8/05 1:17 PM Page 5