Filter
Top Products
Using the surface units. GEAppliances.com
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either
direction to the setting you want.
A HOT COOKTOP indicator light will glow
when any radiant element is turned on,
and will remain on until the surface is
cooled to approximately 150°F.
Indicator light will:
■ come on when the unit is turned on or hot
to the touch.
■ stay on even after the unit is turned off.
■ glow until the unit is cooled to approximately
150°F.
The WM (warm) setting (on some
models) on the right REAR surface unit
keeps already heated food warm until
ready to serve.
Dual Surface Unit (on some models)
The dual surface unit has 2 cooking sizes to select
from so you can match the size of the unit to the
size of the cookware you are using.
To use the small (5 or 6 inch) surface
unit, push in the SMALL BURNER portion
of the switch above the control knob.
To use the large (8 or 9 inch) surface
unit, push in the LARGE BURNER portion
of the switch above the control knob.
At both OFF and HI the control clicks
into position. You may hear slight
clicking sounds during cooking,
indicating the control is maintaining
your desired setting.
Be sure you turn the control knob
to OFF when you finish cooking.
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
7