Filter
Top Products
6
Customer Service
Troubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
Customer Service
Troubleshooting Tips
Installation
Instructions
Safety Instructions
Operating Instructions
Customer Service
Troubleshooting Tips
Installation
Instructions
Safety Instructions
Operating Instructions
Start (Models without a Dial)
Close and latch the door. Touch the START/RESET pad to begin the cycle. Water fill begins and
approximately 60 seconds later the wash action begins.
NOTE: The dishwasher remembers your last cycle so you don’t have to reprogram each time.
When the dishwasher is loaded and the door latch is in the locked position, the control panel lights
will be ON and display the last settings you selected.
If you don’t want to change any of the settings, simply touch the START/RESET pad to begin
the cycle.
Also, if a power failure occurs, NORMAL and HEATED DRY will automatically be programmed. Make
any new selections and touch the START/RESET pad to begin the cycle.
Clean (Model GSD3900 only)
This light is illuminated when a wash cycle is complete. The light will stay ON until the door is opened.
Control Settings
About the dishwasher control panel.