Filter
Top Products
Care
and
cleani~
(continued)
Light bulb replacement
In Fresh Food Compartment
1.
Unplug refrigerator.
2. To align the control knob
properly, note position of
numbered control for proper
reassembly and pull off knob.
3. Pull bottom of light panel down
about
l/4’’—just
enough to disengage
lip at rear from grooves in retainers
on rear wall.
4. Lift panel to disengage top from
pins on side walls; remove panel.
Afier replacing with same size
bulb, reinstall panel (hang top on
pins; pull bottom down, push it
back and release it to let lip engage
grooves in retainers). Replace
temperature control knob in OFF
position, turn it to previous setting,
and plug refrigerator back in.
In
Freemr
Compartment
MODEL CSX24
1.
Unplug refrigerator.
2. Remove shelf that’s just below
light shield. (Shelf will be easier to
remove if it is emptied first.)
3. Pull plastic light shield toward
you. (It will bend to free tabs from
grooves.)
4. Replace bulb with same size
bulb.
5. Reinstall shield and shelf.
6. Plug in refrigerator.
MODEL
CSX22
1. Unplug refrigerator.
2. Remove shelf that’s just below
light shield. (Shelf will be easier to
remove if it is emptied first.)
3. Pull plastic light shield toward
you. (It will bend to free tabs from
grooves.)
When you goon vacation
For extended vacations or
absences, shut off power to
refrigerator, turn the numbered
control to OFF, clean interior
with baking soda solution of one
tablespoon of soda to one quart of
water. Wipe dry. To prevent odors,
leave open box of soda in refrigerator.
Leave
doors open.
For shorter vacations, remove
perishable
foods and leave controls
at regular settings. However, if
room temperature is expected to
drop below
60°F.,
follow same
instructions as for extended
vacations.
Move
icemaker feeler arm to OFF
(up) position and be sure to shut off
water supply to the refrigerator.
When you move
Disconnect power cord from wall
outlet, remove all food and clean
and dry the interior.
Secure
all
loose items
such as
grille, shelves and storage pans
by taping them securely in place
to prevent damage.
Be sure refrigerator stays in
upright
position
during actual moving and
in van. Refrigerator must be secured
in van to prevent movement. Protect
outside of refrigerator with blanket.
4. Replace bulb with same size
bulb.
5. Reinstall shield and
shelf.
6. Plug in refrigerator.
14