GE FCM7 Freezer User Manual


 
Consumer Support
Troubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
11
Normal operating characteristics. ge.com
These things are normal and
do not indicate a need for service.
A warm cabinet exterior as the refrigeration system transfers heat from the inside to the outside through
the exterior cabinet walls.
The sound of the high-efficiency compressor motor.
Before you call for service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What To Do
Freezer does not Temperature control Move the control to a temperature setting.
operate or Power-On in OFF position.
Light is not on
Freezer is unplugged. Push the plug completely into the outlet.
The fuse is blown/circuit Replace fuse or reset the breaker.
breaker is tripped.
Freezer starts/stops Door/lid left open. Check to see if package is holding door/lid open.
too frequently
Too frequent or too long
door/lid openings.
Temperature control See About the operation of your freezer.
set too cold.
Freezer operates Door/lid left open. Check to see if package is holding door/lid open.
too long
Too frequent or too long
door/lid openings.
Temperature control See About the operation of your freezer.
set too cold.
Inadequate air circulation See Preparing to install the freezer.
space around cabinet.
Fast Freeze switch is in the See About the operation of your freezer.
ON position (on some models)
Noisy operation Floor may be weak, causing Placing 2 X 4’s (51 mm X 102 mm) under the length of
or cabinet vibrates freezer to vibrate when the freezer will help support it and may reduce vibration.
compressor is on.
Cabinet is not positioned See Preparing to install the freezer. Or use shims for
solidly on floor. uneven floor.
Freezer temperature Door/lid left open. Check to see if package is holding door/lid open.
too warm
Too frequent or too long
door/lid openings.