Filter
Top Products
Installation Instructions
REVERSING THE DOOR SWING (cont.)
TRANSFER FREEZER DOOR HANDLE
Using a thin-blade screwdriver, carefully
remove the square button plugs from
the handle. NOTE: Be careful not to scratch
the stainless or plastic surfaces.
Remove the round button plugs on the other
side of the door. NOTE: Be careful not to scratch
the stainless steel surface.
Using a Phillips screwdriver, remove the screws
from the handle.
Insert the round button plugs into the holes
on the hinge side of the door. NOTE: Be careful
not to scratch stainless steel.
Place the door handle over the holes
on the handle side of the door. Attach using
screws removed earlier.
Insert the square button plugs over the handle
screws. NOTE: Be careful not to scratch
stainless steel or plastic surfaces.
6
A
Square
Button
Plugs
TRANSFER FREEZER DOORSTOP
AND HOLE INSERTS
Remove the freezer doorstop from the bottom
right side of the door.
Remove the hole insert from the bottom right
side of the freezer door.
Install the freezer doorstop to the bottom left
side of the freezer door.
Install the hole insert on the bottom left side
of the freezer door.
Using a flat-head screwdriver, remove the hole
insert from the top left side of the freezer door.
NOTE: Be careful not to scratch the stainless
steel or plastic surfaces.
Install the hole insert on the top right side
of the freezer door.
7
A
B
C
B
C
D
E
F
Round
Button
Plugs
Phillips
Screws
D
E
F
12
Hole
Insert
Doorstop
Hole
Insert