Filter
Top Products
TRANSFER REFRIGERATOR AND
FREEZER DOOR STOPS
Remove the door stop on the right side of the
bottom of the door by removing the two screws.
Move the plastic hinge hole thimble to the
opposite hole.
Install the door stop on the left side, making
sure to line up the screw holes in the door stop
with the holes in the bottom of the door.
6
A
B
C
Bottom of Door (Right Side) Bottom of Door (Left Side)
A
TRANSFER REFRIGERATOR
DOOR HANDLE TO RIGHT
Refer to Remove the Fresh Food Door Handle
and Attach the Fresh Food Door Handle
sections for instructions.
7
Installation Instructions
INSTALL BOTTOM HINGE AND
LEVELING LEG
Using a 1/2” socket ratchet/driver, install the
hinge pin and nut in the opposite hole on the
hinge bracket with leveling leg.
Using a 5/16” socket ratchet/driver, install the
hinge bracket with leveling leg on the left side
of the refrigerator. The pin will be toward the
outside of the refrigerator.
Using a 5/16” socket ratchet/driver, install the
leveling leg bracket on the right side of the
refrigerator.
5
A
B
C
REHANG FREEZER DOOR
Lower the freezer door onto the bottom hinge pin.
Ensure that the plastic hinge pin thimble is on the
hinge pin or inside the door hinge pin hole located
in the bottom of the door.
Straighten the door and line it up with the
center hinge bracket.
Install the center hinge pin with a 3/4” socket
ratchet/driver. Turn it until it extends through
the hinge bracket and into the freezer door.
8
A
B
C
REVERSING THE DOOR SWING (cont.)
24