Filter
Top Products
13
Fresh food
compartment
door bins and
freezer door
tilt-out bins
Large Bins
The larger fresh food compartment door bins and
freezer tilt-out door bins are adjustable.
To remove: Lift the front of the bin straight
up, then lift up and out.
To replace or relocate: Engage the back side
of the bin in the molded supports of the door.
Then push down on the front of the bin.
Bin will lock in place.
Small Bins
To remove: Lift the front of the bin straight
up, then out.
To replace: Position the bin above the rectangular
molded supports on the door.
Then slide the bin down onto the support
to lock it in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door shelf.
Place a finger on either side of the snugger near
the rear and move it back
and forth to fit your needs.
Press tab and pull shelf
forward to remove
Fresh food compartment door bin
Freezer tilt-out bin
Snugger
Shelves and Bins
Stainless Steel Refrigerator
The slide-out spillproof shelf allows you to reach
items stored behind others. The special edges are
designed to help prevent spills from dripping to
lower shelves.
To remove: Slide the shelf out until it reaches the
stop, then press down on the tab and slide the
shelf straight out.
To replace or relocate: Line the shelf up with the
supports and slide it into place. The shelf can be
repositioned when the door is at 90° or more. To
reposition the shelf, slide the shelf past the stops
and angle downward. Slide shelf down to the
desired position, line up with the supports and
slide into place.
NOTE: Make sure you push the shelves all the way
back in before you close the door.
Slide-out
spillproof
shelf
Do not block
Top freezer bin
CAUTION:
Be careful when
placing items in
the top bin. Make
sure that items
do not block or fall
into the ice chute.
MISE EN
GARDE : Soyez
prudents lorsque
vous placez des
articles dans le bac
supérieur. Assurez-
vous qu’aucun
objet ne bloque
ou tombe dans la
chute à glaçons.