Filter
Top Products
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Loading the dishwasher racks.
The Wash Tower
Keep the center area clear in the lower rack.
The wash tower rises through the center of the lower
rack during the wash and rinse portions of the cycle.
The wash tower shoots water into the mid-level wash
arm located under the upper rack. Blocking the
wash tower could result in poor wash performance
for items in the upper rack.
Don’t block or load tall things next to the
Wash Tower.
14
Lower Rack
When loading the lower rack, do not load large platters or
trays in the front right corner. They may prevent detergent
from circulating during the wash cycle.
The lower rack is best used for plates, saucers, and
cookware. Large items such as broiler pans and
racks should go along the right-hand side. Load
platters, pots and bowls along the sides, in corners,
or in the back. The soiled side of items should face
the center of the rack. If necessary, oversized
glasses and mugs can be placed in the lower rack
to maximize loading flexibility.
Also, be careful not to let a portion of an item such
as a pot or dish handle extend through the bottom
rack. This could block the wash arm and result in
poor wash performance.
Fold-down fingers (on some models) provide
flexibility for extra-large and hard-to-fit items.
The fingers may be left in the up position or folded
down to customize the lower rack.