Filter
Top Products
Consumer Support Troubleshooting Tips Operating Instructions Safety Instructions
Installation
Instructions
Troubleshooting Tips
Installation
Instructions
Safety InstructionsOperating InstructionsTroubleshooting Tips
Installation
Instructions
Safety InstructionsOperating Instructions
6
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move the
control beyond the MIN position, and clean
the interior with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
Care and cleaning of the refrigerator.
Replacing the Light Bulb
Moving the control beyond the MIN position
does not remove power to the light circuit.
The bulb is located behind the shield in the
back wall.
Unplug the refrigerator.
Remove shelves.
Remove the screw.
Gently remove the light shield by inserting
a flat blade screwdriver into the slot at the
top of the shield and pop it off.
Replace the bulb with an appliance
bulb of the same or lower wattage
(15 Watt maximum).
Insert the tab at the bottom of the light
shield into the light bulb housing and
snap it into place.
Replace the screw.