Filter
Top Products
Installation
Instructions
Self Cleaning Free-Standing
Electric Range
EER2000, EER3000 JBP24, JBP26, JBP30, JBP35, JBP48, JBP64, JBP65,
JBP66, JBP67, JBP70, JBP78, JBP79, JBP85, JB940, JB960, JB965
"If you have questions, Call 800-GE-CARES orvisitour websiteat:
www.G EAppliances.com"
Skill Level: High ! _ Low
Completion Time: 1 to 3 Hours
Proper installation is the responsibility of the installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty. See the Owners Manual for warranty
information.
CAUTION: Before you begin
Read these instructions carefully and
completely.
• IMPORTANT- Save these instructions for
local inspector's use.
• IMPORTANT- Observe all governing codes
and ordinances.
• NOTE TO INSTALLER- Be sure to leave
these instructions with the consumer.
• OWNER- Keep these instructions for future
refe re nce.
• WARNING- This appliance must be
properly grounded.
Parts Included
Anti-Tip Bracket and leg leveler
Materials Needed
Lag Bolts Anchor Sleeves
(For Concrete Floors Only)
4- Wire Cord
4'long
( UL Approved 40 AMP)
OR 3 -Wire Cord
4'long
Tools You Will Need
J
1/4"Nut
driver
Level
Adjustable wrench
Phillips
Screwdriver
Drill with
1/8" Bit
Pencil Safety
Glasses
J
5/16" Hex Head
Nut driver
Tape Measure
__F at-Bladed
Screwdriver
Pub. No. 31-10463
229c4053P447-3 1