Filter
Top Products
7
Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions
Care and Cleaning Troubleshooting Tips Consumer Support
Using the surface units.
GEAppliances.com
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both
OFF
and
HI
the control
clicks
into position. You may hear slight
clicking
sounds during cooking,
indicating the control is keeping the
power level you set.
A
HOT COOKTOP
indicator light will glow
when any radiant element is turned on,
and will remain on until the surface is
cooled to approximately 150°F.
Indicator light will:
■
come on when the unit is hot to the touch.
■
stay on even after the unit is turned off.
■
glow until the unit is cooled to approximately
150° F.
The
WM
(warm) setting on the right
REAR
surface unit keeps already heated
food warm until ready to serve.
Be sure you turn the control knob to
OFF when you finish cooking.
Using the Bridge Burner
To use the bridge burner, turn the
control knob to the
BRIDGE BURNER
settings.
For full bridge burner operation, turn
on the rear burner.
To use only the front burner, turn the
control knob to the
FRONT BURNER
settings.
5
Dual Surface Unit Control Knob
The dual surface unit has 2 cooking sizes to select
from so you can match the size of the unit to the
size of the cookware you are using.
To use the small (5 or 6 inch) surface
unit, turn the control knob to the
SMALL BURNER
settings.
To use the large (8 or 9 inch) surface
unit, turn the control knob to the
LARGE BURNER
settings.
9"
6"