Filter
Top Products
How to Set Auto Defrost
Before you begin, check the guide located on the
inside front of oven when you open the door.
It shows minimum and maximum food weights for
a variety of foods. You will need to know your food
weight before setting Auto Defrost.
Step 1: Remove food from package, place in oven on
microwave-safe dish and close door.
Step 2: Touch Auto Defrost pad.
Step 3: Enter weight. For example, touch number
pads 1 and 2 for weight of 1.2 pounds (1 pound, 3
ounces). See Conversion Guide below. After 3
seconds “START” flashes.
Step 4: Touch START pad. Display
shows defrost time counting down.
Twice during defrosting,
the oven beeps 4 times
and ‘‘TURn’’ flashes.
Follow the directions in
the Auto Defrost Guide
for what to do at the first
and second signal.
Then close the door and
touch START pad.
When defrosting time is completed, ‘‘End’’ flashes
and oven beeps 4 times. ‘‘End’’ remains on display
and oven beeps every minute until door is opened or
CLEAR/OFF pad is touched.
START
AUTO
DEFROST
16
AUTO DEFROST
Auto Defrost
With the Auto Defrost feature, the oven
automatically sets the defrosting times and
power levels for you.
Use the Auto Defrost guide on the next page. Enter
the food weight in pounds and tenths of a pound (see
Conversion Guide below). Then touch START pad.
The oven calculates defrosting time and changes power
levels during defrosting to give even defrosting results.
After Auto Defrosting, meat needs to stand in order to
let the inside defrost. You may take the food out of the
oven if you wish. Stand time recommendations are
given in the guide on the next page.
If the weight of food is stated in
pounds and ounces, the ounces
must be converted to tenths (.1)
of a pound.
Ounces Pounds
1–2 .1
3 .2
4–5 .3
6–7 .4
8 .5
9–10 .6
11 .7
12–13 .8
14–15 .9
Stand Time Conversion Guide