Filter
Top Products
10
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
BAKE Pad
Touch to select the bake function.
BROIL HI/LO Pad
Touch to select the broil function.
CONVECTION BAKE Pad
Touch to select baking with the convection
function.
CONVECTION ROAST Pad
Touch to select roasting with the convection
function.
PROOF Pad
Touch to select a warm environment useful
for rising yeast-leavened products.
START Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function error
code. Touch the CLEAR/OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation. If the function error
code repeats, disconnect the power to the oven and call for
service.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage.
SELF CLEAN LO/STD Pad
Touch to select self-cleaning function. See the
Using the self-cleaning oven section.
OVEN LIGHT ON/OFF Pad
Touch to turn the oven light on or off.
DELAY START Pad
Use along with COOK TIME or SELF CLEAN
LO/STD pads to set the oven to start and stop
automatically at a time you set.
COOK TIME Pad
Touch and then touch the number pads to set
the amount of time you want your food to
cook. The oven will shut off when the
cooking time has run out.
CLEAR/OFF Pad
Touch to cancel ALL oven operations except
the clock, timer and range lockout.
CLOCK Pad
Touch before setting the clock.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
KITCHEN TIMER ON/OFF Pad
Touch to select the timer feature.
PROBE Pad
Touch when using the probe to cook food.
WARM Pad
Touch to keep cooked foods warm. See the
How to Set the Oven for Warming section.
RANGE LOCKOUT Pad
Touch the Range Lockout pad, then touch
START to lock/unlock the range surface
burners.
NOTE: On some models, the control lockout is 9
and 0. Touch and hold the 9 and 0 pads at the same
time for 3 seconds.
Using the oven controls.
(Throughout this manual, features and appearance may vary from your model.)
Oven Control, Clock and Timer Features and Settings
Features and appearance may vary.