Filter
Top Products
6
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsConsumer Support
Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the
features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They
remain in the control’s memory until the steps are repeated.
When the display shows your choice, press the START pad. The special features will remain in
memory after a power failure.
12 Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn off this feature, follow
the steps below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the DELAY START pad until no
shdn (no shut-off) appears in the
display.
Press the START pad to activate the
no shut-off and leave the control set
in this special features mode.
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change
this to use the Centigrade selections.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the BROIL HI/LO and COOKING
TIME pads at the same time. The
display will show F (Fahrenheit).
Press the BROIL HI/LO and
COOKING TIME pads again at the
same time. The display will show
C (Centigrade).
Press the START pad.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking and roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed Cook
and Hold will automatically start.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows SF.
Press the COOKING TIME pad. The
display will show Hld OFF.
Press the COOKING TIME pad again
to activate the feature. The display
will show Hld ON.
Press the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.