Filter
Top Products
FEATURES OF YOUR OVEN CONTROL
1. CLEAIVOFF.
Press this pad to cancel
all
oven
operations except clock and timer.
2.
PROGRAM STATUS.
Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.
3.
TIME DISPLAY.
Shows the time of day, the times
set for the timer or automatic oven operation.
4. OVEN TEMPERATURE AND BROIL
DISPLAY.
Shows the oven temperature or the
broil setting selected.
5.
FUNCTION INDICATORS.
Lights up to
show whether the oven is in bake,
broil
or
self-clean mode.
~
6. INCREASE. Short taps to this pad increase time
or temperature by small amounts. Press and hold
the pad to increase time or temperature by
larger amounts.
7.
DECREASE.
Short taps to this pad decrease
time or temperature by small amounts. Press and
hold the pad to decrease time or temperature by
larger amounts.
8.
BROIL.
Press this pad to select the broil function.
9.
BAKE.
Press this pad to select the bake function.
10. CLEAN. Press this pad to select self-cleaning
function. See the Operating the Self-Cleaning
Oven section.
11. COOK TIME. Use this pad for Timed Bake
operations.
12.
STOP TIME. Use this pad along with the COOK –
TIME or CLEAN pad to set the oven to start and
stop automatically at a time you select.
13. CLOCK.
To set clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to set time of day. Press the CLOCK pad
to start.
14.
TIMER.
Press this pad to select timer function.
The timer does not control oven operations. The
timer can time up to 9 hours and 55 minutes.
To set timer, first press the TIMER pad. Then
press the INCREASE or DECREASE pad to
change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad while TIMER is displayed.
If “F-” and a number flash on display and the
oven control signals, this indicates function
error code.
Press the
CLEAWOFF
pad. Allow the
oven to cool for
1
hour. Put the oven back into
operation. If the function error code repeats,
disconnect power to the range and call for service.
—
10