GE JTP27 Oven User Manual


 
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
7
www.GEAppliances.com
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous 6
second beep may be canceled.
To cancel the 6 second beep:
Press the
upper
oven
BAKE
and
BROIL
HI/LO
pads at the same time for 3
seconds until the display shows
SF.
Press the
KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continuous beep). Press the
KITCHEN TIMER ON/OFF
pad again.
The display shows
BEEP.
(This
cancels the one beep every 6
seconds.)
Press the
START
pad.
NOTE:
On models with touch pad controls for both
ovens, this cancels the end of cycle tone for
both ovens.
This feature is not available, for the lower
oven, on models with oven knob(s).
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Press the
upper
oven
BAKE
and
BROIL
HI/LO
pads at the same time for 3
seconds until the display shows
SF.
Press the
CLOCK
pad once. The
display will show
12 hr.
If this is the
choice you want press the
START
pad.
Press the
CLOCK
pad again to change
to the 24 hour military time clock.
The display will show
24 hr.
If this
is the choice you want press the
START
pad.
Press the
CLOCK
pad again to black-
out the clock display. The display will
show
OFF.
If this is the choice you
want press the
START
pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.