Filter
Top Products
PART QUANTITY
Grease Filter only (JV338) 1
Charcoal Filter only 1
(JN327 and RN328)
Grease Filter and Charcoal 2
Filter (JV347, JV348 and JV367)
Mounting Screws 4
(8 - 18″ x 3/4″ Phillips pan head)
Exhaust Adaptor 1
(for 3
1
⁄4″ x 10″ rect. venting)
Exhaust Adaptor Screw 1
(8 - 18″ x 3/8″ Phillips pan head
or hex head)
8
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
DAMAGE – SHIPMENT/INSTALLATION
PARTS INCLUDED
MOUNTING SPACE
NOTES:
• This range hood is for installation over ranges or
cooktops up to 36″ wide.
• If you are going to vent your range hood to the outside,
see the “Ducting Requirements” section for exhaust duct
preparation.
66″ or more
from the floor
to the top of
the hood
30″ or 36″
30″
min.
Bottom edge of
cabinet needs
to be 30″ or
more from
the cooking
surface
Flat-blade and Phillips
screwdrivers
Pencil
Metal snips
(in some
applications)
Electric drill
Saw (saber or keyhole)
Duct tape
Pliers
Level
Caulking
Tape measure
TOOLS YOU WILL NEED
1/4″ pivoting
hex socket
Flashlight
Wire stripper
1/4″ Nutdriver
Installation Instructions