GE JVM140H Microwave Oven User Manual


 
Your Touch Control
Rnel
The touch control panel allows you to set the oven
controls electronically with the touch of a finger. It’s
designed to be easy to use and understand. With your
microwave oven, you have the option of using your
automatic cooking control pads for quick and easy
convenience cooking. Or you may make your own
programs to suit your individualized cooking style.
When You Plug in the Oven
The display panel displays five 8’s, 18 POWER and
all of the oven functions. After 15 seconds, all lights
disappear and “RESET” appears in the upper portion.
Touch the CLEAR/OFF pad, set the CLOCK and
oven is ready for use.
If power is disrupted at any time, the above sequence
recurs and you must reset CLOCK after touching
CLEAR/OFF.
“Error” Appears on Display:
. When using Temp Cook/Hold, you have entered
a temperature less than
90°F.
or more than
199°F.
. When using Auto Defrost, the food weight you
entered did not correspond with the code number
entered.
“Probe” Appears on Display:
Probe has been forgotten when Auto Roast or Temp
Cook/Hold is being used.
Probe is not securely seated in oven wall receptacle.
1. Display Panel.
Displays time of day, time or
temperature during cooking functions, power level
being used, cooking mode and instructions.
2.
Time Cook I and Time Cook II.
Microwave for a
preset amount of time using automatic power level 10
or change power level
afier setting time. (See page 8.)
3.
Auto
S@rt.
Allows you to program your oven to
begin cooking at a preset time of day—up to a 12-hour
delay. (See page 8.)
4.
Clock.
Touch this pad to enter time of day or check
time of day while microwaving. To set clock, first
touch CLOCK pad and then enter time of day. For
example, if time is
1:30,
touch number pads 1, 3, and
O and
“1:30”
will appear on display. “START” will
flash on display, directing you to touch START, thus
setting the clock. If you wish to reset or change time,
simply repeat above process.
6.
Clear/Off.
When touched, it stops the oven and
erases all settings except time of day.
7. Auto Roast. Insert probe, touch this pad, and
desired number pad for code to slow-cook or
temperature cook meat with automatic preset
program. (See pages 12 and 13.)
8. Exhaust Fan. Press HI, LO or OFF for desired
fan speed.
9.
Time Defrost.
Gentle thawing at automatic power
level 3, or change power level after entering time.
(See page 9.)
10. Temp Cook/Hold.
Use the temperature probe to
cook by using a preset temperature. When internal food
temperature reaches
90°F., oven shows temperature
until preset temperature is reached and holds
temperature for up to one hour. (See page 10. )
H.
Min/Sec Timer.
This feature uses no microwave
energy while it functions as both a kitchen timer or as
a holding period between defrost and time or
temperature cooking. (See page 11.)
U.
Power
tivel.
Touch this pad before entering
another power level number if you want to change
from automatic power level 10 (High) for cooking or
power level 3 (Low) for defrosting.
U.
Start.
Touch this pad to begin any function.
14. Auto Defrost.
Touch this pad, then code number
and food weight. The oven automatically sets power
levels and defrosting time. (See page 14.)
K. Light.
Touch desired pad to illuminate counter or
to turn on night light.
AU~MATIC
FN
FEAT=
Cooking appliances installed under the oven might,
under some heavy usage conditions, cause temperatures
high enough to overheat some internal parts of the
microwave oven.
To prevent overheating from taking place, the exhaust
fan is designed to automatically turn on at low speed if
excessive temperatures occur. Should this happen,
the fan cannot be manually turned off, but it will
automatically turn off when the internal parts have
cooled. The fan may stay on up to approximately 30
minutes after the range and microwave oven controls
have been turned off.
5.
Number Pads.
Touch these pads to enter cook
time, food temperature, power level, Auto Roast codes
or Auto Defrost codes and food weight.
6