GE JVM142J Microwave Oven User Manual


 
How to Use the Minute/Second Timer
The Minute/Second Timer has
three timing functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting
after defrosting.
The Minute/Second Timer operates
without microwave energy.
How to Time a 3-Minute
Phone Call
n
MIN/SEC
TIMER
1. Touch MIN/SEC TIMER pad.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes “End,” and display shows
time of day.
Using a Holding Time
The Minute/Second Timer can
also be used to program a “holding
time” between microwave cooking
functions. The time can range from
one second to 99 minutes and 99
seconds. A holding or standing
time may be found in some of your
own recipes or in the cookbook
supplied.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch either TIME
COOK I & II,
TEMP COOK &
HOLD or AUTO ROAST and enter
cook time, temperature or code.
Touch MIN/SEC TIMER and enter
number of minutes to delay cooking.
When delaying
Temp
Cook &
Hold or Auto Roast cooking, be
sure probe is in food. Touch
START. Timer will count down
to
zero
and
cooking will begin.
18
How
to Defrost, Hold and
Time Cook
Let’s say you want to defrost a
frozen casserole for
15 minutes,
hold for 10 minutes and then Time
Cook for 25 minutes. Here’s how
to do it:
Step 1: Take casserole from
freezer and place in oven.
n
TIME
DEFROST
Step 2: Touch TIME DEFROST
pad.
Step 3: Touch pads 1,5,0 and O
for 15 minutes defrosting time.
(Defrosting is automatically set on
power level 3 but can be changed
by touching the POWER LEVEL
pad and the desired power level.)
n
MIN/SEC
TIMER
Step
4: Set standing or hold time
by touching MIN/SEC TIMER pad.
Step 5: Touch 1,0,0 and O to hold
for ten minutes.
n
TIME COOK
I &II
Step 6: Touch TIME COOK
I & 11 pad.
Step 7: Touch 2,5,0 and O for 25
minutes of cooking time.
n
START
Step 8: Touch START pad. As
each function is automatically
performed, oven display shows
instructions entered and the
function.
Step 9: When time is up, the oven
signals and flashes “End.”
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes, Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in defrost and amount of
time. Then program the hold time.
Be sure to put the thawed dish in
the refrigerator promptly.
NOTE: Foods that are
highly
perishable, such as milk, eggs,
fish, stuffings, poultry and pork
should not be allowed to sit out
for more than one hour after
defrosting. Room temperature
promotes the growth of harmful
bacteria.
Q. I programmed my oven for a
specific defrosting time but it
defrosted
longer
than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set
the
oven to defrost for 4 minutes, hold
for 2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes.