Filter
Top Products
35
Consumer Support
Troubleshooting TipsOperating InstructionsSafety Instructions
Cooktop Light/Night Light
Replace the burned-out bulb with a 120 volt, 20-watt
halogen bulb (WB36X10213), available from your
GE supplier.
To replace the bulb(s), first disconnect the power
at the main fuse or circuit breaker panel or pull
the plug.
Remove the screw at the right edge of the light
cover and push on the left edge of the cover
to open.
Be sure the bulb(s) to be replaced are cool before
removing. After breaking the adhesive seal,
remove the bulb by pulling straight out. Replace
with the same size and type bulb.
Raise the light shield and replace the screw.
Connect electrical power to the oven.
4
3
2
1
Replacing the light bulbs. www.GEAppliances.com
Remove screw