GE LVM1750 Microwave Oven User Manual


 
Helpful Information
Light Bulb Replacement
1 To replace the bulb(s), first
disconnect the power at
the main fuse or circuit
breaker panel or pull
the plug.
2 Remove the screw at the
left of the light cover and
lower the cover.
3 Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4 Replace the screw.
Connect electrical power
to the oven.
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.
Cooktop Light/
Night Light
1 To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2 To remove the top grille,
open the door and
remove the 3 screws on
top of the oven that hold
the grille into place. Slide
the grille to the left to
remove it.
3 Lift the metal tab on the
light cover located above
the handle.
4 After breaking the
adhesive seal, remove the
bulb by gently turning.
Replace with the same
size and type bulb.
5 Replace the light cover.
6 Replace the grille and
screws. Connect electrical
power to the oven.
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.
Oven Light
Remove screw
Screws
38
Light cover
Filter housing