Filter
Top Products
4
Cutout for 27″ (68.6 cm) Single Built-In
Ovens only
For JCKP30, JCKP70, JCKS10, PCK916, PCK920 models only.
Cabinet Width 68.6 cm (27”)
Recommended
Cutout Location
from Floor 82.6 cm (32 1/2”)
Cutout Depth 59.7 cm
(23 1/2”) Min.
Cutout Width 63.5 cm
(25”) Min.
64.1 cm
(25 1/4”) Max.
Cutout Height 70.2 cm
(27 5/8”) Min.
71.4 cm
(28 1/8”) Max.
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For single
ovens, the runners and braces must
support 68 kg (150 lbs.).
Installation Instructions
18"
27"
24"
2" x 4" or
Equivalent
Runners
45.7 cm (18”)
68.6 cm (27”)
61 cm
(24”)
5 cm x 10 cm (2” x 4”) or
equivalent runners level
with bottom of cutout
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
These ovens are not approved
for stackable installation.
NOTE: If the cabinet does not
have a front frame and the sides
are less than 1.9 cm (3/4”) thick,
shim both sides equally to
establish the cutout width.
A
Cabinet
Width
68.6 cm
(27”)
12.7 cm
(5”) Max.
from the left
or right
side
Junction Box
Location
Recommended
cutout location
from floor 82.6 cm
(32 1/2”)
Allow a minimum
of 50.8 cm (20”) for
clearance to adjacent
corners, drawers, walls,
etc. when door is open
50.8 cm
(20”)
Allow 2.5 cm (1”)
for overlap of oven
over side edges of
cutout
5 cm x 10 cm
(2” x 4”)
or equivalent
runners level
with bottom
of cutout
Cutout Width
63.5 cm
(25”) Min.
64.1 cm
(25 1/4”) Max.
55.9 cm (22”) Min.
above base rail
Cutout
Height
70.2 cm (27 5/8”) Min.
71.4 cm (28 1/8”) Max.
Alternate
Junction Box
Location –
access from
adjacent
cabinet may
be required
Allow 2.5 cm
(1”) minimum
for overlap of
oven top and
bottom of cutout