GE PT925DNBB Oven User Manual


 
Optional Undercounter Dimensions and Installation Information
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Specification Revised 4/09
220244
PT925DN
GE Profile
30" Built-In Single/Double Convection Wall Oven
Note: Specific 30" and 36" radiant cooktops
with knob controls are approved for use over
the GE Profile single/double PT925: JP346,
JP356, PP912, PP932, PP942, JP655, PP963,
PP972 and ZEU36K. Refer to cooktop and wall
oven installation information packed with
products for current dimensional data.
Note: Gas cooktops are not approved for use
over the GE Profile single/double PT925. The
gas cooktops are too deep to fit above the new
wall oven.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Note: 30" and 36" Induction cooktops with
knob-free electronic controls are approved for
use over the GE Profile single/double PT925:
PHP900, PHP960, ZHU30 and ZHU36.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
5
NOTE: This oven is only
approved to be installed under
the speci c models as labeled
on this unit.
Installation Instructions
Cutout for 30
(76.2 cm)
Single Double
Oven Under Counter
MUST SUPPORT 200 LBS. (91 Kg)
240V / 208V
Junction Box
Location (junction
box may be in
adjacent cabinet)
Allow 1 (2.5 cm)
overlap top
of oven,
11/16(1.8 cm)
overlap side edges
of cutout and
1 1/4 (3.2 cm)
overlap bottom
of oven.
Top and/or side  llers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.
Electric cooktops may be installed over this oven. See cooktop
installation instructions for cutout size. See label on top of oven
for approved cooktop models.
28 1/2(72.4 cm) Min.
28 5/8(72.7 cm) Max.
27 1/4(69.2 cm) Min.
27 5/16(69.4 cm) Max.
A
36(91.4 cm)
Typical
Countertop
Height
22(55.9 cm) Min.
Above Support
Platform
9 1/2
(24.1 cm)
Max.
25(63.5 cm)
24(61 cm)
Must
match
toekick
height
4(10.2 cm)
Typical
Toekick
3/4(1.9 cm)
Support Platform
Required
Cutout -
Observe all
dimensions
and
requirements.
Center Line
30.5”
(77.5 cm)
Center Line
Cutout -
Observe all
dimensions
and
requirements.
2” (5.1 cm)
Min.