Filter
Top Products
About the crispers andpans. ww .GEAppliances.com
Not all features are on all models.
Fruit and Vegetable Crispers
Excess water that may accumulate in the
bottom of the drawers should be wiped di7.
Onsomemodels,the bottom drawer has
full extension slides that allow full access
to the draw,el:
HJ_ LO Adjustable Humidity Crispers
L Slide the control all the way to the
HIsetting to provide high humidity
recommended for most vegetables.
Slide the control all dm way to the
LO setting to provide lower humidity
levels recommended for most fruits.
5 ¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸¸¸¸5¸¸
Convertible Meat Pan
The convertible meat pan has its own
cold air duct to allow a stream of cold air
from the freezer compamnent to flow to
the pan.
The variable temperature controI regulates
the airflow from dm Climate Keeper.
Set the control to the coldest setting to store
fi'esh meats.
Set the control to coldtu convert the pan
to normal refiigerator temperature and
provide extra vegetable storage space. The
cold air duct is turned off. Variable settings
between these extremes can be selected.
Aboutcrisperremoval
Not all features are on all models.
Crisper Removal
The top crispers can easily be removed by
pulling the drawer straight out and lifting
the drawer tip and over the stop location.
If the door prevents you from taking out
the drawers, first nT to remove the door
bins. If dais does not offer enough
clearance, the refiigerator will need to
be rolled forward until the door opens
enough to slide the drawers out. fn some
cases, when you roll the refrigerator out.
you will need to move the refiigerator
to the left or right as you roll it out.
Toremovethe bottomcrisper.
O Pull the drawer out to the stop
position.
Lift the front of the drawer up and out
of the wire holder.
Toreplacethe bottomcrisper:
Place the back of the drawer in the
wire holdm; making sure the wire
holder fits into the grooves on dm back
of the pan.
A Lower the fi'ont of the drawer into the
wire holder.
Pull the bottom of the wire holder
v
forward until the wire pops into the
groove located on the bottom of the
drawer.
Lilt the back of the drawer tip and out. POpwireintogroove
11