Filter
Top Products
25
Troubleshooting TipsInstallation Instructions
Customer Service
Operating InstructionsSafety Information
Door Alignment
After leveling, make sure that the doors are even at the top.
To make the doors even,
adjust the fresh food door. Insert a 3/16″ Allen wrench
into the bottom of the hinge pin. Turn the door adjusting screw to the right to
raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of
the pin, prevents the pin from turning unless a wrench is used.) After one or two
turns of the wrench, open and close the fresh food door and check the
alignment at the top of the doors.
Make sure doors are
even at the top.
Uneven Doors
Hinge Pin
Raise
3/16″ Allen Wrench
Dimensions and Specifications
(for Built-In Style models)
70
1
/
4
″
36″
24″
24″
Cabinet
24″ Side Panels
Water Electrical
3/4″ Airspace
(1/2″ Gap + 1/4″
Wall Plates)
25″
Counter
Top