Filter
Top Products
P. 02 GE - Advanced Materials
SilPruf* SCS2000 silcone sealant & adhesive
Typical Performance Properties (continued)
• Thermal Stability (cured state) - once cured, the material
remains elastic over a range of -55°F (-48°C) to 300°F (149°C) and
up to 400°F (204°C) under intermittent short-term exposure.
• Extended Work Life - designed to allow the user sufficient time
for placement and tooling.
• Low Sag or Slump - useful for application to horizontal, vertical
or overhead surfaces.
• Low VOC - significantly lower than the requirements of the U.S.
Green Building Council’s Leadership in Energy and Environmental
Design (L.E.E.D.) program.
• Product Versatility - full adhesive and chemical compatibil-
ity with GE - Silicones’ silicone elastomeric coating (SilShield*
SEC2400) and silicone pre-cured weatherstrip (UltraSpan*
US1100).
• Compatible with these GE - Silicones insulating glass products:
IGS3703, IGS3713-D1, IGS3729, IGS3723, IGS3733, IGS3743.
• Compatible with these GE - Silicones weatherproofing product
lines: SCS2700, SCS9000, SCS2800, US1100, SEC2400.
• Compatible with these GE - Silicones structural products
SSG4000, SSG4000AC, SSG4800J, SSG4400.
• Neutral cure byproduct with low odor.
Basic Uses
• SilPruf SCS2000 sealant & adhesive is useful as a weatherproof-
ing material when sealing between dissimilar or similar materials
in either new or remedial glazing and sealing applications.
• SilPruf SCS2000 sealant & adhesive is useful as a weatherproof-
ing sealant at window perimeters and punched openings.
• SilPruf SCS2000 sealant & adhesive is useful as a structural
glazing adhesive (project review required).
• SilPruf SCS2000 sealant & adhesive has been sucessfully tested
in protective glazing designs and may be considered a candidate
for such applications.
• SilPruf SCS2000 sealant & adhesive is useful as an adhesive in
panel stiffener applications.
• SilPruf SCS2000 sealant & adhesive is useful for adhering
GE - Silicones UltraSpan US1100 pre-cured silicone weatherstrip
product line.
Packaging
SilPruf SCS2000 sealant & adhesive is available in 10.1 fl. oz.
(299 ml) plastic caulking cartridges, 20.2 fl.oz. (597 ml) foil sausage
packs, 2 gallon plastic pails (2 gals. / 7.6 L) and 5 gallon plastic
pails (5 gals. / 18.9 L). Plastic cartridges are packaged as 24 units in
cardboard boxes and are dispensed using a single component hand
or air-pressured caulking gun. Cartridges and pails are designed
for convenience in shipping and are easily handled by warehouse
workers and mechanics on scaffolds and staging. Sausage packs
are designed to reduce volume of used containers compared to
conventional sealant cartridges, thereby reducing solid waste. The
use of sausage packs also boosts productivity by cutting typical
reloading time in half.
Colors
SilPruf SCS2000 sealant & adhesive is available in 8 standard colors,
6 special colors, and can be custom colored.
Grade Color
SCS2002 . . . . . . . . . . . .White
SCS2003 . . . . . . . . . . . .Black
SCS2004 . . . . . . . . . . . .Limestone
SCS2008 . . . . . . . . . . . .Light Grey
SCS2009 . . . . . . . . . . . .Aluminum Grey
SCS2010 . . . . . . . . . . . .Dark Grey
SCS2020 . . . . . . . . . . . .Precast White
SCS2097 . . . . . . . . . . . .Bronze
SCS2040 . . . . . . . . . . . .Earth Tone
SCS2041 . . . . . . . . . . . .Red Brick
SCS2046 . . . . . . . . . . . .Champagne
SCS2006 . . . . . . . . . . . .Antique Pink
SCS2100.0322 . . . . . . .Blue Spruce
SCS2100.0148 . . . . . . .Sandy Beige