GE Single Door Refrigerator Refrigerator User Manual


  Open as PDF
of 4
 
INSTALL CENTER HINGE PIN
(For models without freezer door)
Install the hinge pin into the new hinge bracket.
4
Installation Instructions
REMOVE BOTTOM HINGE AND
LEVELING LEG
(For models with
freezer door)
Using a 1/2″ socket ratchet/driver, remove the nut
and hinge pin from the hinge bracket with leveling
leg. Using a 5/16″ socket ratchet/driver, remove
the screws from the bottom hinge bracket. These
will be reinstalled on the other side.
Using a 5/16″ socket ratchet/driver, remove
the screws from the leveling leg bracket on
the other side. These will be reinstalled on the
opposite side.
5
A
B
Bottom Hinge
Bracket
Leveling Leg
Bracket
INSTALL BOTTOM HINGE AND
LEVELING LEG
(For models with
freezer door) (cont.)
Using a 5/16″ socket ratchet/driver, install the
hinge bracket with leveling leg on the left side
of the refrigerator. The pin will be toward the
outside of the refrigerator.
Using a 5/16″ socket ratchet/driver, install the
leveling leg bracket on the right side of the
refrigerator.
6
C
INSTALL BOTTOM HINGE AND LEVELING
LEG
(For models with freezer door)
Using a 1/2″ socket ratchet/driver, install the
hinge pin and nut in the opposite hole on the
hinge bracket with leveling leg.
6
A
3
TRANSFER REFRIGERATOR AND FREEZER
DOOR STOPS
Remove the door stop on right side of the bottom
of the door by removing the two screws.
Move the plastic hinge hole thimble to the
opposite hole.
Install the door stop on the left side, making
sure to line up the screw holes in the door stop
with the holes in the bottom of the door.
7
A
B
C
Bottom of Door (Right Side) Bottom of Door (Left Side)
A
B
 previous