Filter
Top Products
Customer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Preparing to install the refrigerator.
8
Leveling Legs
(on some models)
Adjustable legs
at the front corners of the
refrigerator should be set so the refrigerator is firmly
positioned on the floor and the front is raised just
enough that the door closes easily when opened
about halfway.
To adjust the leveling legs,
turn the legs
clockwise to
raise
the refrigerator,
counterclockwise to lower
it.
Read these instructions completely and carefully.
Before plugging in the refrigerator, let it stand for about two hours. This reduces the possibility of
problems with the cooling system due to moving and handling.
Refrigerator Location
Do not install the refrigerator where the
temperature will go below 50°F (10°C) because
it will not run often enough to maintain proper
temperatures.
Install it on a floor strong enough to support it
fully loaded.
Do not install it closer than 5″ (13 cm) next to
a range.
Do not install it in a recessed area.
Do not build in the refrigerator.
Clearances
Allow the following clearances for ease of
installation and proper air circulation.
Sides
1
/
2
″ (13 mm)
Top 2″ (51 mm)
Back 2″ (51 mm) from the rear cabinet surface
to the wall
Turn clockwise to raise,
counterclockwise to lower.