GE TBX20 Refrigerator User Manual


 
Shelves
How
to
rearrange
your shelves
Adjustable Shelves in
Fresh Food Compartment
(on
models
so
equipped)
Some models have adjustable
shelves in the fresh food compart-
ment, enabling
you
rearrange the
shelves
to
fit
your family's food
storage needs.
To
remove shelves:
Tilt
shelf up
at front, then
lift
it
up and out
of
tracks
on
rear wall of refrigerator.
To
replace shelves:
Select desired
shelf height. With shelf front raised
slightly, engage top lugs
in
tracks
at rear
of
cabinet. Then lower front
of
shelf until
it
locks into position.
Tempered glass shelves (on models
so
equipped) are adjustable
in
the
same manner.
Spacemaker Door
(on
models
so
equipped)
Deep shelves on doors
of
General
Electric refrigerators provide
convenient storage for frequently-
used items.
Deeper shelves
on
Spacemaker
Doors can accommodate a two-liter
bottle on the bottom shelf and a
six-pack
on
the shelf above
it.
Snuggeds),
on models
so
equipped, are designed
to
give
you storage flexibility
on
your
fresh food door. Salad dressing,
steak sauces and other condi-
ments can now be kept securely
against the door liner to help pre-
vent tipping, spilling and sliding.
For
most efficient operation, place
index finger and middle finger
on
either side of snugger and move
it
back and forth to
fit
your
needs.
Two-Position
Shelf in
Freezer Compartment
(on
models
so
equipped)
To
remove shelf:
Lift shelf off shelf
supports,
tilt
it,
and take
it
out.
To
relocate shelf:
1.
After removing shelf. remove
shelf supports by sliding them
upward and replace them
on
other
set of mounts.
2.
Lower shelf onto relocated
supports.
Partial-Width
Shelf
in
Freezer Compartment
(on
models
so
equipped]
To
relocate this
shelf
against the
opposite
wall:
1.
Remove shelf.
2.
Remove shelf supports by
sliding them upward and replace
them
on
mounts on opposite wall.
3.
Replace shelf with legless end
on repositioned supports.
7