Filter
Top Products
9
Safety Instructions
Operating Instructions
Troubleshooting Tips
Consumer SupportInstallation Instructions
ge.com
Door Reversal
1. Remove the two plug buttons on the top left of the cabinet.
2. Remove the plastic hinge cover by gently pressing forward
and lifting
by the back edge.
3. Remove the two screws from the top hinge.
4. Lift the top hinge up and off of the refrigerator.
5. Lift the door up and off of the bottom hinge.
6. Remove the hinge pin grommet from the bottom of the door
on the right side and insert into the left side.
7. Tilt the refrigerator cabinet backward.
8. Remove the hinge pin. Keep the two spacers for
reinstallation.
9. Remove the hinge leveling leg and the three screws to
remove the bottom hinge on the right side.
10. Remove the case leveling leg and the case screw from the
left side. Notice that the case leveling leg is different from
the hinge leveling leg.
11. Flip the bottom hinge plate to install on the left side of the
refrigerator.
12. Screw the three bottom hinge screws into place.
13. Put a spacer between the hinge pin and the bottom hinge
and screw the hinge pin into place.
14. Place the second spacer between the hinge pin and the
door. Position the door on the bottom hinge.
15. While the magnetic gasket holds the door in place, secure
the top hinge with two screws.
16. Replace the hinge cover on the top hinge.
17. Place the two plug buttons in the holes on the right side of
the refrigerator cabinet.