Filter
Top Products
19
Before You Call For Service
Dishwasher
Questions?
Use this
problem
solver
PROBLEM POSSIBLE CAUSE WHAT TO DO
Sanitized light does not The door was opened and • Do not interrupt the cycle anytime during
illuminate at the end of the cycle was interrupted or after main wash.
the cycle (Anti-Bacteria during or after the main
cycle only) wash portion
Low inlet water • Raise the water heater temperature to
temperature 120°F (49°C).
Interior lights not Door was open for more • Latch the door and reopen.
working than 15 minutes
Bulbs are burnt out • Call for service to replace bulbs.
End-of-cycle indicator Dishwasher has not • Open the door and check the status
light does not illuminate completed cycle indicator lights on control panel to
determine if cycle is complete.