Filter
Top Products
17
Preparation
Icemaker
Front
leveling legs
Your icemaker has 2 adjustable leveling legs to
help you steady the product and make sure it
is level.
1. Place a carpenter’s level on top of the
icemaker to make sure it is level from front
to back and side to side.
2. Lift the top front of the icemaker to locate
the leveling screws that are on the bottom
front.
3. Using an adjustable wrench, change the
height of the legs as follows:
•Turn the leveling leg to the right to lower
that side of the icemaker.
•Turn the leveling leg to the left to raise that
side of the icemaker.
NOTE: The icemaker should not wobble.
Use shims to add stability when needed.
4. Use a carpenter’s level to make sure the
icemaker is even from front to back and side
to side.
Raise
Lower