GE ZDP48L4G Range User Manual


 
38
Questions?
Before you
call for
service…
PROBLEM POSSIBLE CAUSE
OVEN WILL NOT Plug on the range is not completely inserted in the electrical outlet.
WORK
A fuse in your home may be blown or the circuit breaker tripped.
The oven controls are not properly set.
The oven controls are set for cleaning. If necessary, allow the oven to
cool then open the door.
OVEN WILL NOT The controls are not properly set.
SELF-CLEAN
48 MODELS: • When the oven is set for cleaning, only the surface burners may
UNABLE TO USE THE be used. The companion oven, the griddle and/or the grill cannot
COMPANION OVEN, be used.
GRIDDLE AND/OR
GRILL WHEN
SELF-CLEANING
“CRACKING” OR This is normal. This is the sound of the metal heating and cooling
“POPPING” SOUND during both the cooking and cleaning functions.
DURING CLEANING
EXCESSIVE SMOKING Excessive soil. Press the OFF selector button. Open the windows to
OCCURS DURING rid the room of smoke. Wait until the DOOR LOCKED light goes
CLEANING off. Wipe up excess soil and reset the clean cycle.
STRONG ODOR FROM
An odor from the insulation around the inside of the oven is normal
SELF-CLEAN CYCLE
for the first few times the oven is used. This is temporary.
OVEN NOT CLEAN • The oven was heavily soiled. Clean up heavy spillovers before starting
AFTER A CLEAN the clean cycle. Heavily soiled ovens may need to self-clean again.
CYCLE
The oven controls are not properly set. See the Self-Cleaning section.
The Problem Solver
Stainless Steel Range