Filter
Top Products
Installation Options
13
COOKTOP INSTALLATION OVER A
MONOGRAM WARMING DRAWER,
MODEL ZTD910 OR ZKD910
These cooktops may be installed over a 30″
or 27″ Warming Drawer. Both the cooktop and
the warming drawer must be installed according to
each specific installation instruction.
Use a 36″ or wider base cabinet.
• Plan gas supply location carefully to avoid
interference with the warming drawer.
POWER SUPPLY:
If local codes permit, the cooktop and warming
drawer may operate from the same 120V duplex
outlet. Refer to installation instructions for details.
Install 2x4 or 2x2 anti-tip block against
rear cabinet wall 9″ from cutout floor
to bottom of block
23-1/2″ min.
Cooktop 33-7/8″
19-1/8″
2-1/2″ min.
1-1/2″ cabinet top
5-1/2″ min.
NOTE: When installing a Monogram Warming Drawer
below a cooktop, a solid barrier must be installed at least
1″ from the lowest point of the bottom of cooktop
burner box to the top of cutout. See Warming Drawer
Installation Instructions for details.
36″
countertop
height
9-1/4″
A
25″
9″
Dim. A
ZTD910 28-1/2″
ZKD910 25-1/2″