Filter
Top Products
3
If you received
a damaged
appliance
The warranty does not cover damage
caused after delivery.
Immediately contact the dealer (or
builder) that sold you the bar refrigerator
with icemaker.
If you
need
service
To obtain service, see the Consumer
Services page in the back of this manual.
We are proud of our service and want you
to be pleased. If for some reason you are
not happy with the service you receive,
here are steps to follow for further help.
For customers in the USA:
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
NEXT, if you are still not pleased, write
all the details—including your phone
number—to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
For customers in Canada:
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
NEXT, if you are still not pleased, write
all the details—including your phone
number to:
Manager, Consumer Relations
Camco Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
Consumer Information
Bar Refrigerator with Icemaker
After
installation
is completed
• Promptly inspect your new Monogram
bar refrigerator with icemaker. If it has
been damaged, contact the Installer or
Dealer immediately.
• This bar refrigerator with icemaker must
be properly leveled to ensure correct
door alignment, door closure and ice
production. Contact the Installer if
the unit is not level.
• The unit should be centered in the
opening. In a standard 24″ opening, the
front face of the Stainless Steel door will
be flush with adjacent cabinetry. The
front face of the Custom Panel door
should be 1
3
⁄4″ forward of adjacent
cabinetry. Contact the installer if
clearance is not correct.
• Test the door swing. Carefully open and
close the door. The door should not rub
or catch on adjacent cabinetry. Notify the
installer if the door makes contact with
cabinetry.
Please Contact the Installer or Dealer if
you experience any of these problems.
Your custom panel (ZIBI240 model only)
bar refrigerator with icemaker is shipped
with two toekicks, a stainless steel and a
black toekick. For shipping purposes, one
of the toekicks will be secured to the back
or on the inside of the unit, and the
second will be installed on the unit. Keep
the unused toekick and other unused or
removed parts for possible future use.
Remove
packaging
Before using, be sure all packing materials
and tape have been removed.
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape on
new appliances is an application of
household liquid detergent. Apply with
a soft cloth and allow to soak. Wipe dry
and then apply an appliance polish to
thoroughly clean and protect the surface.
Save time
& money
Before you request service, check the
Problem Solver in the back of this manual.
It lists causes of minor operating problems
that you can correct yourself.