Filter
Top Products
3
CONTENTS
Important Information
Tools, Hardware ........................................3
Parts Required..............................................3
Caring for Your Stainless Steel ............3
Design Guide (for ZIDS240)
The Installation Space..............................4
Product Clearances....................................4
Side-by-Side Installations ......................4
Design Guide (for ZIDI240)
The Installation Space..............................5
Product Clearances....................................5
Side-by-Side Installations ......................5
Installation Instructions
Step 1, Remove Packaging ....................6
Step 2, Install Custom 3/4″
Drawer Panels and Handles
(ZIDI240 model only) ............................6, 7
Step 3, Level ..................................................7
Step 4, Connect Power ............................8
Step 5, Slide Product into Cutout ........8
Step 6, Set Temperature Controls ......8
Important Information
ZIDI240 MODEL ONLY
PARTS REQUIRED
• Custom handles
• Overlay panels
• Spacer panels
• Backer panels
• Screws
PARTS SUPPLIED
• Drawer side trims
• Optional black or
stainless steel toekick
TOOLS REQUIRED
• Adjustable wrench
• Carpenter’s glue (ZIDI240 model only)
• Screwdriver (ZIDI240 model only)
CARING FOR YOUR STAINLESS STEEL
• Before installation or first use, we strongly advise you
polish the stainless steel exterior and handles with a
commercially available stainless steel cleaner such
as Stainless Steel Magic
™
. To preserve and protect
the fine finish, we also strongly advise that you
apply stainless steel cleaner monthly.