Filter
Top Products
22
Questions?
Use this
problem
solver!
! ""$"
! $# • Icemaker power switch is in the 476 position, but the water supply
K$((L"$ to the refrigerator has not been connected. Set the power switch
to the 7// position. Keeping it in the 476 position will damage
the water valve.
$"% • Old cubes need to be discarded.
!#"#
• Ice storage bin needs to be emptied and washed.
• Unsealed packages in fresh food and/or freezer compartments may
be transmitting odor/taste to ice cubes.
• Interior of refrigerator needs cleaning. See Care and Cleaning.
"! • Water filter clogged. Replace the filter or use the filter bypass plug.
&$"
"&$ • Door may have been left open.
!(
• Turn temperature of freezer compartment colder.
See Temperature Controls.
$""! • Icemaker or water supply turned off. Turn on icemaker or water supply.
"#&!
• Ice cubes are frozen to the icemaker feeler arm. Remove the cubes.
• Irregular clumps in the storage bin. Break up with fingertip pressure
and discard remaining clumps. The freezer may be too warm. Adjust
the freezer temperature control colder one step at a time until clumps
do not form.
&#!"! • Water dispenser has not been used for a long time. Dispense water
#"#! until all water in the system has been replenished.
&#!!"# • Normal when refrigerator is first installed. Allow 24 hours for
"""&! the refrigerator to completely cool down.
• Water dispenser has not been used for a long time. Dispense water
until all water in the system has been replenished.
• Water system has been drained. Allow several hours for the replenished
water supply to chill.
&#!""! • Water supply line turned off or not connected.
"#&! See the Installation Instructions.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• Air may be trapped in the system. Press the dispenser arm for
at least 2 minutes.
&#!"$!# • Newly installed filter cartridge. Run 1
1
⁄2 gallons from the dispenser
!""! to clear the system.
The Problem Solver
Stainless Steel Refrigerator