GE Monogram B480DX Refrigerator User Manual


 
For answers to your Monogram,
®
GE Profile
or GE
®
appliance questions, visit our website
at ge.com or call GE Answer Center
®
service,
800.626.2000.
110180
Specification Created 3/08
Listed by
Underwriters
Laboratories
ZISW/B480DX
GE Monogram
®
48" Built-In Side-by-Side Refrigerator with Dispenser and
Water Filter
Dimensions and Installation Information (in inches)
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR
guidelines
for energy efficiency.
48" Side-by-Side (in inches)
A B C D E
1/4" Backer Panel 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16
.10" Spacer Panel 45 8-5/8 67 17-1/4 25-1/4
3/4" Spacer Panel 46-1/8 9-3/4 68-5/8 18-13/16 26-13/16
*Dispenser Cutout Position (in inches)
F G
48" Models 17-15/16 5-1/4
3/4" Overlay Panel Dimensions
For a more custom appearance,
overlay panels may be installed on
trimmed models. The overlay panel
must be secured to a 1/4"-thick
backer panel which slides into the
trim. A spacer panel 0.10" thick must
be placed between the overlay and
backer panels.
194Dia_64
Fresh
Food
Freezer
Panel
D
F
G
A
B
Grille Panel
C
Dispenser
Cutout
E
9-5/8"
194Dia_63
Dispenser Cutout
15-3/8"
194Dia_58
3/4"
Overlay
Panel
Door
.10"
Spacer
1/4"
Backer
Panel
Raised Overlay Panel Design
On Dispenser Models
When a raised panel design is to be used, a custom wide
middle rail is required to accept the dispenser trim.
• The middle rail must be wide enough to allow for the
dispenser trim to overlap the opening.
• The middle rail must be 1.100" total thickness to accept the
dispenser trim.
.250" + .10" + .750" =
1.100" Total Panel Thickness
NOTE: Left-to-right offset is not
always equal to top-to-bottom
offset.
* Cut the dispenser opening after the backer, spacer and
overlay panels have been assembled.
Important Note: Maximum total panel weight:
• Fresh food door panel – 75 lbs.
• Freezer door panel – 53 lbs.
• Grille panel – 18 lbs.
Center each panel over the
other. Assemble the panels with
glue and screws. Screws must
be countersunk into the backer
panel.
194Dia_65
Spacer Panel
Overlay Panel
Backer Panel
1/4" Backer Panel
3/4" Overlay Panel
Wide
Middle
Rail is
Required
194Dia82
Dispenser
Trim
16-3/4"
10-5/8"
.10" Spacer
Side View