GE Monogram Built-In Refrigerators Refrigerator User Manual


 
8
Temperature Controls
Built-In Refrigerators
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display
between Fahrenheit and Celsius, press
Temp Display °C/°F.
The temperature display shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature will
vary from the set temperature based on factors
such as door opening, amount of food, defrost
cycling and room temperature.
NOTE: Frequent door openings or door left
open for periods of time may increase the
internal temperature of the freezer and fresh
food compartments temporarily.
To turn off the cooling system in both the
freezer and fresh food compartments, press
either pad until both displays show OFF.
To turn the cooling system on, press either
pad. The preset temperatures of 0°F and
37°F will appear in the display.
To check the current temperature setting
for the fresh food or freezer compartment,
press the or pad once. After 5 seconds,
the display will return to the actual temperature.
To change the temperature settings, press
the or pads to desired temperature set
point for fresh food and freezer separately.
Allow 24 hours for the refrigerator to reach the
temperature you have set.
Temperature Ranges
Low High
Fresh Food
Freezer
NOTE: Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.
34°F
1°C
–6°F
–21°C
45°F
7°C
+6°F
–14°C
Door
alarm
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will
come on. To turn it off, press it again.
On models with a dispenser, the Door Alarm
feature is located on the dispenser panel on
the front of the freezer door.
When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the
door open for more than
2 minutes.
Preset Settings:
Allow 24 hours to reach these preset temperatures.