ZIS480NR – GE Monogram 48" Built-In Side-by-Side Refrigerator
with Automatic Icemaker and Water Filter
Specification Revised 3/08
110167
3/4" Overlay Panel Dimensions
For a more custom appearance, overlay
panels may be installed on trimmed
models. The overlay panel must be
secured to a 1/4"-thick backer panel
which slides into the trim. A spacer
panel 0.10" thick must be placed
between the overlay and backer panels.
194Dia_58
3/4"
Overlay
Panel
Door
.10"
Spacer
1/4"
Backer
Panel
.250" + .10" + .750" =
1.100" Total Panel Thickness
NOTE: Left-to-right offset
is not always equal to
top-to-bottom offset.
48" Side-by-Side (in inches)
A B C D E
1/4" Backer Panel 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16
.10" Spacer Panel 45 8-5/8 67 17-1/4 25-1/4
3/4" Spacer Panel 46-1/8 9-3/4 68-5/8 18-13/16 26-13/16
Important Note: Maximum weight
for fresh food panel is 50 pounds
and 30 pounds for freezer panel.
Center each panel over the other.
Assemble the panels with glue
and screws. Screws must be
countersunk into the backer panel.
194Dia_65
Spacer Panel
Overlay Panel
Backer Panel
Listed by
Underwriters
Laboratories
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR
guidelines
for energy efficiency.
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
1/4" Framed Panel Dimensions
If you choose to install framed panels,
they must be cut to the dimensions
shown. The panels will slide into the
frame on the door and grille.
If the custom panel is less than 1/4" thick,
and it fits loosely in the door frame, it can
be backed up with a piece of filler material
or foam tape to improve the fit.
Important Note: Maximum weight for
fresh food panel is 50 pounds and 30
pounds for freezer panel.
194Dia_59
Door
5/16"
Trim
Reveal
1/4"
Panel
194Dia64
Fresh Food
Panel
Freezer
Panel
E
D
A
B
Grille Panel
C
194Dia64
Fresh Food
Panel
Freezer
Panel
26-9/16"
18-9/16"
45-7/8"
9-1/2"
Grille Panel
68-3/8"