Filter
Top Products
10
Storage Drawers
Bottom Mount Refrigerator
Sealed snack
pans
The sealed snack pans retain high humidity for
the convenient storage of lunch meats and
cheese, hors d’oeuvres, spreads and snacks.
To remove a snack pan, pull the pan out and lift
the front of the pan up until it snaps out of the
wire holder.
To replace a snack pan, place the back of the
pan in the wire holder. Lower the front of the
pan, then push down until the front of the pan
snaps into the wire holder.
Drawer
removal
Drawers in the fresh food compartment will
stop before coming all the way out of the
refrigerator, to help prevent contents from
spilling onto floor.
To remove a drawer, pull the drawer out and lift
the front of the drawer up and out of the wire
holder. Lift the back of the drawer up and out.
To remove the drawers when the refrigerator
door cannot be opened fully, the shelf above the
drawers must be removed. Push the shelf back
then lift up. Tilt the cover and take it out.
To replace a drawer, place the back of the
drawer in the wire holder, making sure the
extensions of the side of the drawer fit into the
back of the wire holder. Lower the front of the
drawer into the wire holder. Press firmly on the
top of the drawer.
Storage
drawers
These drawers have individual, adjustable
humidity controls that let you control the
amount of cold air entering the drawers.
Slide the control all the way to the High setting
and the drawer provides higher humidity levels
recommended for most leafy vegetables.
Slide the control all the way to the Low setting
and the drawer provides lower humidity levels
recommended for most fruits.
Excess water that may accumulate in the
bottom of the drawers should be emptied
and the drawers wiped dry.