3
Consumer Information
Wine Chiller
If you received
a damaged
appliance
The warranty does not cover damage
caused after delivery.
Immediately contact the dealer (or builder)
that sold you the wine chiller.
Remove
packaging
Before using, be sure all packing materials
and tape have been removed.
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape on
new appliances is an application of
household liquid detergent. Apply with a
soft cloth and allow to soak. Wipe dry and
then apply an appliance polish to
thoroughly clean and protect the surface.
After
installation
is completed
• Promptly inspect your new Monogram
Wine Chiller. If it has been damaged,
contact the Installer or Dealer
immediately.
• This Wine Chiller must be properly
leveled to ensure correct door alignment
and door closure. Contact the Installer
if the unit is not level.
• The unit should be centered in the
opening. The front face of the door
should be 25 mm forward of adjacent
cabinetry. Contact the installer if
clearance is not correct.
• Test the door swing. Carefully open and
close the door. The door should not rub
or catch on adjacent cabinetry. Notify the
installer if the door makes contact with
cabinetry.
Please Contact the Installer or Dealer if
you experience any of these problems.
Your Wine Chiller is shipped with a black
toekick on the front of the unit. For
shipping purposes, an optional stainless
steel toekick is secured to the back of the
unit. That toekick should have been
removed and installed, or given to you.
Keep the unused toekick and other unused
or removed parts for possible future use.