Filter
Top Products
www.GEAppliances.com
Burner Grates
Lift out when cool. Grates should be
washed regularly and, of course, after
spillovers. Wash them in hot, soapy water
and rinse with clean water. When replacing
the grates, be sure they are positioned
securely over the burners.
On models with professional-style double
grates, the grates are position-specific. For
maximum stability, these grates should only
be used in their proper position; they
cannot be interchanged left to right or
front to back. For convenience, the
undersides of the left and right grates are
marked “LEFT FRONT” and “RIGHT
FRONT.”
Do not operate a burner for an extended
period of time without cookware on the
grate. The finish on the grate may chip
without cookware to absorb the heat.
To get rid of burned-on food, place the
grates in a covered container. Add 1/4 cup
ammonia and let them soak several hours
or overnight. Wash, rinse well and dry.
Although they are durable, the grates
will gradually lose their shine, regardless
of the best care you can give them. This is
due to their continual exposure to high
temperatures. You will notice this sooner
with lighter color grates.
NOTE: Do not clean the grates in a self-cleaning oven.
Cooktop Surface
To avoid damaging the porcelain enamel
surface of the cooktop and to prevent it
from becoming dull, clean up spills right
away. Foods with a lot of acid (tomatoes,
sauerkraut, fruit juices, etc.) or foods with
high sugar content could cause a dull spot
if allowed to set.
When the surface has cooled, wash and
rinse. For other spills such as fat spatterings,
etc., wash with soap and water once the
surface has cooled. Then rinse and polish
with a dry cloth.
NOTE: Do not lift the cooktop on sealed burner
models. Lifting the cooktop can lead to damage
and improper operation of the range.
NOTE: Do not store flammable materials in
an oven or near the cooktop. Do not store or
use combustible materials, gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
Consumer SupportInstallation Instructions Troubleshooting TipsOperating Instructions
Safety Instructions
Stainless Steel Surfaces (on some models)
Do not use a steel-wool pad; it will scratch
the surface.
Shake bottle well.
Place a small amount of CERAMA
BRYTE
®
Stainless Steel Appliance
Cleaner on a damp cloth or damp
paper towel.
Clean a small area (approximately
8″ x 8″), rubbing with the grain of the
stainless steel if applicable.
Dry and buff with a clean, dry paper
towel or soft cloth.
Repeat as necessary.
NOTE: If a mineral oil-based stainless steel
appliance cleaner has been used before to
clean the appliance, wash the surface with
dish soap and water prior to using the
CERAMA BRYTE
®
Stainless Steel Appliance
Cleaner. After washing the surface with dish
soap and water, use a generous amount of
CERAMA BRYTE
®
Stainless Steel Appliance
Cleaner to clean the appliance.
To Order
To order CERAMA BRYTE
®
Stainless Steel
Appliance Cleaner, please call our toll-free
number:
National Parts Center 800.626.2002
www.GEAppliances.com
CERAMA BRYTE
®
Stainless Steel Appliance
Cleaner . . . . . . . . . . . . . . . . . . . .# PM10X311
27