Upper Rack
The upper rack is for glasses, cups and saucers.
This is also a secure place for dishwasher-safe
plastics. A cup shelf may be placed in the up
or down position to add flexibility. The upper rack
is good for all kinds of odd-shaped utensils.
Saucepans, mixing bowls and other items should
be placed face down.
Secure larger dishwasher-safe plastics over two
tines when possible.
Make sure small plastic items are secure so they
can’t fall onto the heater.
Be sure that items do not protrude through the
bottom of the rack and block rotation of the
middle spray arm. This could result in poor wash
performance for items in the upper rack.
10
For best dishwashing results, follow these
loading guidelines. Features and appearance
of racks and silverware baskets may vary from
your model.
Lower Rack
When loading the lower rack, do not load large
platters or trays in the front left corner. They may
prevent detergent from circulating during the wash
cycle.
The lower rack is best used for plates, saucers
and cookware. Large items should go along the
sides. Load platters, pots and bowls along the
sides, in corners or in the back. The soiled side
of items should face the center of the rack.
Be careful not to let a portion of any item, such as
a pot or dish handle, extend through the bottom
rack. This could block the wash arm and cause
poor washing results.
Loading the Racks
Dishwasher
The Wine Glass Holder secures wine glasses for
best washability. You may also remove the
silverware basket to allow for all glasses loading
of the lower rack.
Wine Glass
Holder