GE Monogram ZDIC150 Ice Maker User Manual


 
11
Care and Cleaning
Icemaker
Caring
for your
icemaker
The clean light signal will illuminate yellow when
the electronic control senses that the need for
cleaning is approaching. At this time you need to
purchase Nickel Safe Ice Machine Cleaner by Nu
Calgon, available at most appliance repair shops
or through GE Parts and Accessories. Order part
number WX08X42870. In the U.S.A., call 1-800-
626-2002 or visit Monogram.com. In Canada call
1-800-561-3344. The clean light will eventually
turn red which means the icemaker must be
cleaned, otherwise ice production will decrease
significantly or stop altogether.
IMPORTANT: For best results, use the entire
contents of the bottle to clean the unit.
See Care and Cleaning—Icemaker system section.
The air cooled condenser (see page 9
for location) needs to be cleaned regularly
for efficient ice production and energy
conservation.
See Care and Cleaning - Condenser section.
Exterior
surfaces
Door handles and trim—Clean with a cloth
dampened with soapy water. Dry with a soft
cloth.
Keep the outside clean. Wipe with a clean cloth
lightly dampened with mild liquid dish detergent.
Dry with a clean, soft cloth. Do not wipe the
icemaker with a soiled dish cloth or wet towel.
These may leave a residue that can damage the
finish. Do not use scouring pads, powdered
cleaners, bleach or cleaners containing bleach
because these products can scratch and
damage the finish.
Stainless steel—Regularly clean and polish the
stainless steel door panels and handles (on
some models) with a commercially available
stainless steel cleaner such as Stainless Steel
Magic
to preserve and protect the fine finish.
Stainless Steel Magic is available through
GE Parts and Accessories, 800.626.2002,
or monogram.com. Order part number
WX10X15.
Do not use appliance wax or polish on the
stainless steel.