GE Monogram ZET837WYWW Oven User Manual


 
12
Installation
30" Built-In Convection Ovens
• Grasp door firmly on both sides.
• Slide the hinge slots in the bottom of the door over
the hinges.
• Push the door all the way in against oven.
• Open the door fully and push hinge latches down,
as illustrated, on both sides to secure.
• Close the door and open slowly to be sure it moves
smoothly.
Step 6
Replace the
oven door
Hinge Latch
Normal Position
Step 7
Connect
electrical
CAUTION
WARNING
Electrical Shock Hazard
• Electrical ground is required on this
appliance.
• Do Not connect to the electrical
supply until appliance is
permanently grounded.
• Disconnect power to the junction box before
making the electrical connection.
• This appliance must be connected to a grounded,
metallic, permanent wiring system, or a grounding
connector should be connected to the grounding
terminal or wire lead on the appliance.
Failure to do so could result in a fire, personal
injury or electrical shock.
• When connecting to a 3-conductor branch circuit:
–Connect oven red lead to branch circuit red lead.
–Connect oven black lead to branch circuit black
lead.
–Connect oven bare copper conductor and white
lead to branch circuit neutral lead (white or gray).
Note:
Use copper wire only.
• When connecting to a 4-conductor branch circuit:
–Connect oven red lead to branch circuit red lead.
–Connect oven black lead to branch circuit black
lead.
–Break connection between oven white lead and
oven bare copper conductor.
–Connect oven white lead to branch circuit neutral
lead (white or gray).
–Connect oven bare copper conductor to branch
circuit ground lead (green or bare copper).