GE Monogram ZISB420DM Refrigerator User Manual


 
Monogram.
ZISB420DM – GE Monogram 42" Built-In Refrigerator
with Dispenser and Water Filter
3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may
be installed on trimmed models. The overlay panel
must be secured to a 1/4" thick backer panel which
slides into the trim. A spacer panel 0.10" thick must
be placed between the overlay and backer panel.
Assemble the panels with glue and screws.
Center the spacer panel on the backer panel, left to
right and top to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay
panel and secure with glue and screws. Screws
must be countersunk into the backer panel.
3/4"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
Spacer Panel
Overlay Panel
Backer Panel
.250" + .10" + .750" = 1.100" Total Panel Thickness
NOTE: Left-to-right offset
is not always equal to
top-to-bottom offset.
IMPORTANT NOTE – Dispenser Models
The refrigerator is supplied with two dispenser trims, one
for framed panels and one for overlay panels. The overlay
dispenser trim is designed to fit a total panel thickness
of 1.100".
• If the panel is less than 1.100" a noticeable gap may be
created around the dispenser trim.
• If the panel is more than 1.100" the dispenser trim cannot
be secured to the door.
• The overlay panel must be constructed according to the
specifications shown to achieve the correct total thickness.
• Alternative panel construction methods such as securing a
3/4" panel to a 1/4" backer panel cannot be used. Another
method, routing a 3/4" thick panel on all sides cannot be
used. These methods will not result in the required 1.100"
panel thickness.
Fresh Food
Panel
Freezer
Panel
E
D
F
G
A
B
Grille Panel
C
Dispenser
Cutout
9-5/8"
Dispenser Cutout
15-3/8"
ABCD EF G
1/4” Backer Panel 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16
.10” Spacer Panel 39 8-5/8 67 13-1/4 23-1/4
3/4" Overlay Panel 40-1/8 9-3/4 68-5/8 14-13/16 24-13/16 17-15/16 3-1/8
*Dispenser
Cutout Position
*Cut the dispenser opening after the backer, spacer and
overlay panels have been assembled.
IMPORTANT NOTE: Maximum total weight for assembled fresh
food panel is 50 pounds and 30 pounds for freezer panel.
As an ENERGY STAR
®
Partner,
GE has determined that this product
meets the ENERGY STAR
®
guidelines for energy efficiency.
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
Specification Revised 8/03
110170