GE Monogram ZSC2000FWW/BB Oven User Manual


  Open as PDF
of 3
 
36-3/4" Min.
Required
30"
19"
Min
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
28-1/2"
21"
36-3/4" Min.
30"
24"
Min.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2" Min.
Install 2 x 4
or 2 x 2
Runners or
Solid Bottom,
Must Support
100 lbs.
28-1/2"
21"
9-1/4"
*45-1/4"
30"
24"
Min.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2" Min.
Per Oven
Requirement
28-1/2"
21"
Single Speedcook Installation
Order a 30" wide single oven cabinet or cut the
opening in a wall to dimensions shown.
The rough opening must be:
• Depth – 19" Min.
• Width – 28-1/2" Min.
• Height – 21" Min.
• 36-3/4" from the floor to the cutout is required.
• These ovens require 3/4" overlap on each side, top
and bottom of the cutout.
• Oven overlaps will conceal cut edges on all sides
of the opening.
Specification Created 9/02
Note: Additional clearance between the cutouts may be required.
Check to be sure the oven supports above the warming drawer
location do not obstruct the required interior 23-1/2" depth and
9-1/4" height. See installation instructions for details.
Speedcook Oven Installation above a GE Built-In Wall Oven
Speedcook Oven Installation above a GE Warming Drawer
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
ZSC2000FWW/BB – GE Monogram Built-In Advantium
™
Oven
 previous