Filter
Top Products
8
5
2
1
3
4
6
8
5
7
9
Getting To Know Your GGR200RDDS Grill
1. Lid Knob (p/n 22864 )
2. Lid (p/n 22859)
3. Temperature Control Probe
(p/n 22860)
4. Grill Base (p/n 22861)
5. Grill Plate
6. Drip Tray (p/n 22862)
7. Upper Pedestal Tube( p/n 22870)
8. Lower Pedestal Tube (p/n 22871)
9. Pedestal Stand (p/n 22863)
Fig. 1
Using Indoors
To use your INDOOR/OUTDOOR BARBEQUE GRILL indoors, simply unsnap the
Locking Latch from the Grill Base and lift the Grill Base unit off the Pedestal
Tube and place on a heat resistant surface.
Plasticizer Warning
CAUTION: To prevent Plasticizers from migrating from the finish of the
countertop or tabletop or other furniture, place NON-PLASTIC coasters or
placemats between the appliance and the finish of the countertop or
tabletop.
Failure to do so may cause the finish to darken, permanent blemishes
may occur or stains can appear.
User Maintenance Instructions
CAUTION: Grill surfaces are hot during use. Allow Grill Plate, Grease
Tray, Lid and Base to cool completely before handling and cleaning.
DO NOT clean this product with a water spray or the like.
CAUTION: Do not immerse the temperature control probe in water or any
other liquid.
1. Unplug and allow to cool before disassembling and cleaning.
Thoroughly clean all parts after each use.
2. Remove Temperature Control Probe ( DO NOT IMMERSE). Wipe with
a damp cloth and dry thoroughly.
3. Remove the Grill Base from the Pedestal Tube and empty the Drip Tray .
4. Wash the Grill Plate, Drip Tray, and Lid with hot soapy water
and a plastic scouring pad. Rinse and dry thoroughly.
5. After washing the Grill Plate wipe the uncoated side with a dry towel to
prevent discoloration. Washing may cause oxidation on the uncoated
side of the Grill Plate. This is not harmful and may be wipe off with a damp
towel.
6. DO NOT WASH THE GRILL PLATE IN THE DISHWASHER.
CAUTION: Temperature Control Probe receptacle must always be
completely dry before use.
GR_GGR200RDDS_IB_27-6-07 6/28/07 3:27 PM Page 9